The DENT SC-Series are cost-effective CTs available in several window sizes and for 5A to 1,200A loads.
Standard features include:
- Output is 333mV at rated current
- Internal precision burden resistor across secondary
- Leads-8ft. twisted pair
- Epoxy encapsulated housing
- Accuracy is measured from 10% to 130% of rated current
- Shrouded core blades for protection during installation
- Core interleaved at joints for accuracy
- Phase angle is measured at 50% of rated current
- Snap closing/opening feature
- Accuracy = +/- 1%
- Phase shift <2degrees
High Accuracy 5A CT features:
- 1% of rated current
- Phase shift <.5 degrees
- Spring loaded core
- Wide bandwidth 10Hz to 10KHz
- Excellent low current sensitivity
- ETL recognized per UL506
|
DENT CON-series CTs are specifically designed to offer broad utility in a compact shape. These CTs deliver high accuracy, high sensitivity, versatility, and low phase shift making these probes an excellent choice for use in a wide range of power measurement applications.
-
Current ranges include 2.0 A to 150A; 10 to 600A; 10.0 to1200A AC
-
Output Signal : 333 mV @ Maximum Input
-
Working Voltage : 600Vrms
|
DENT's FLN-Series 36-inch length “rope” type CTs are designed to take measurements where standard current sensors can't. Large buss bars, cable bundles, and irregular shaped conductors will no longer be a challenge.
- Measure from 10 Amps to 3000,
- Working voltage = 1000V rms max.,
- 36 inches in length,
- Accuracy = 1 % of reading,
- Remembers shape, allowing for pre-forming before use,
- Very low phase shift error,
- Dual range (switchable between 300A and 3000A),
- Output = 333mV at 300A or 3000A,
- Battery Life = 4000 hr's typical, 8000 hrs maximum
|
